Model: WPA4XX
| Specifications | ||||||||
|---|---|---|---|---|---|---|---|---|
| Frequency Range (GHz) | Model | Gain (dB) Min. Linear | Gain (±dB) Flatness Max. | 1dB Gain Compression (dBm) Min. | DC Supply mA Max. | Case Type | ||
| 2.0 - 6.0 | WPA403 | 30 | 2.5 | +30 | 750 | CP | ||
| 2.0 - 6.0 | WPA403P | 36 | 3.0 | +33 (2 W) * | 1500 | special | ||
| 2.0 - 18.0 | WPA412A | 25 | 1.5 | +22 | 480 | BMP | ||
| 2.0 - 18.0 | WPA413A | 40 | 2.0 | +22 | 550 | BMP | ||
| 2.0 - 20.0 | WPA412AP | 26 | 1.6 | +27 (0.5 W) | 1200 | BMP | ||
| 2.0 - 20.0 | WPA413P | 40 | 2.5 | +27 (0.5 W) | 1300 | BMP | ||
| 6.0 - 18.0 | WPA422A | 25 | 1.5 | +22 | 480 | BMP | ||
| 6.0 - 18.0 | WPA423A | 40 | 2.0 | +22 | 550 | BMP | ||
| 6.0 - 18.0 | WPA492A | 27 | 2.0 | +30 | 1400 | BP | ||
| 6.0 - 18.0 | WPA493A | 40 | 2.3 | +30 | 1500 | BP | ||
| 6.0 - 18.0 | WPA494PP | 30 | 2.5 | +35 * | 2700 | CP | ||
| 18.0 - 26.5 | WPA432A | 26 | 1.5 | +27 | 650 | BMP | ||
| 18.0 - 26.5 | WPA433A | 40 | 2.0 | +27 | 750 | BMP | ||
| 27.0 - 31.0 | WPA442 | 20 | 1.6 | +27 | 750 | BP | ||
| 17.0 - 20.0 | WPA452 | 15 | 1.3 | +28 | 900 | BP | ||
| 17.0 - 20.0 | WPA453 | 28 | 1.6 | +28 | 1000 | BP | ||
| 18.0 - 30.0 | WPA462 | 15 | 1.0 | +22 | 280 | BMP | ||
| 18.0 - 30.0 | WPA463 | 30 | 1.5 | +22 | 360 | BMP | ||
| 23.0 - 28.0 | WPA472 | 24 | 1.0 | +24 | 600 | BMP | ||
| 18.0 - 40.0 | WPA482A | 18 | 2.5 | +20 | 500 | BMP | ||
| 18.0 - 40.0 | WPA483A | 30 | 3.0 | +20 | 550 | BMP | ||
| 6.0 - 12.0 | WPA423P | 30 | 1.5 | +30 (1 W) | 700 | BP | ||
| 13.0 - 17.0 | WPA4223P | 30 | 1.0 | +30 (1 W) | 750 | BP | ||
| 13.0 - 18.0 | WPA223PP | 30 | 1.2 | +34 * | 2000 | CP | ||
| 17.0 - 27.0 | WPA462P | 20 | 1.4 | +30 (1 W) | 900 | BP | ||
| 17.0 - 27.0 | WPA463P | 30 | 1.6 | +30 (1 W) | 1000 | BP | ||
| 24.0 - 32.0 | WPA473PP | 30 | 2.5 | +34 * | 2200 | BP | ||
| 31.0 - 37.0 | WPA472P | 30 | 3.0 | +30 (1 W) | 2100 | BP | ||
Operating Case Temperature: -40 - +65 °C
Power Supply Voltage: +12V ±5% or, optionall, +15V ±5%. All amplifiers operate on a single supply.
Spurious Response: < 70 dBc (except harmonics)
VSWR: 2.0:1 input, 2.5:1 output
All input/output ports are KF connector above 26GHz.
The parts with (*) denote Psat.
Psat is 2 to 4 dB above P1dB.
Specifications are subject to change, slightly, due to semiconductor lot variation. Other specifications are also available (contact factory).
Caution: All power amplifiers require additional heatsink. Case temperature should not exceed +70°C .
Power Supply Voltage: +12V ±5% or, optionall, +15V ±5%. All amplifiers operate on a single supply.
Spurious Response: < 70 dBc (except harmonics)
VSWR: 2.0:1 input, 2.5:1 output
All input/output ports are KF connector above 26GHz.
The parts with (*) denote Psat.
Psat is 2 to 4 dB above P1dB.
Specifications are subject to change, slightly, due to semiconductor lot variation. Other specifications are also available (contact factory).
Caution: All power amplifiers require additional heatsink. Case temperature should not exceed +70°C .