Model: SDLAC182702A
|
|
| Specifications | Rev. A | |
|---|---|---|
| Frequency Range | 18 - 27 GHz | Designed to meet the following Environmental Conditions: Operating Case Temp.: -40 to +95°CStorage Temp.: -54 to +105°C Mechanical Shock: Per MIL-STD-810F, Method 516.5 Vibration: Per MIL-STD-810F, Method 514.5 Humidity: Per MIL-STD-810F, Method 507.4 Mechanical: SMA Connectors Weight: 2.6 oz. Volume: 0.77 cu in. Material:S303 Finish: Gold Plating per MIL-G-45204B |
| Dynamic Range | -70 to 0 dBm | |
| TSS | -72 dBm max. | |
| Input VSWR | 2.5:1 max. | |
| Rise Time | 9 nsec. typ., 12 nsec.max. | |
| Fall Time | 12 nsec. typ., 20 nsec.max. | |
| Recovery Time | 80 nsec. max. | |
| Propagation Delay | 15 nsec. max. | |
| Log Accuracy | ±1.5 dB max. (±2.0 dB w. temp) | |
| Video Output Drift over temp and dynamic range | -0.04 dB/°C nom | |
| Log Slope (into 100 ohm load) | 50±5 mV/dB (1) | |
| Power Supply Operates ±12V to ±15V | +12V at 350 mA max. -12V at 100 mA max. | |
| DC Offset | +100 ±50 mV (2) | CW Immunity Range: TSS to -25 dBm Pulse Response: 25 nsec. to 100 µsec. CW Baseline Shift:: 100 mV max. Droop: 1.0 dB max.(from -65 to -25 dBm) |
| Maximum Input Level | +12 dBm | |
| Flatness | ±1.5 dB max. | |
| Base Line Noise | 20 mv RMS |
| This product offers the following options: |
|---|
| (1) Slope; 25 mV/dB to 75 mV/dB |
| (2) DC offset; -100 to +400 mV. |
| Note: | Above specifications are based on a slope of 50mV/dB.Some parameters may change for other slope requirements. |
|---|