AMI Catalog - SUCCESSIVE DETECTION LOG AMPLIFIER (SDLA)

Features:	•	Fast Rise/Fall Time
	•	Extremely Small Size
	•	Rugged Construction
	•	Unique Residual, AM Noise Reduction
	•	Designed for Severe Environmental Conditions
	•	Thin Film Hybrid Technology
	•	Switchable Antijamming Capability

	Specifications	Rev. A
Frequency Range	1 - 18 GHz	Designed to meet the following Environmental Conditions: Operating Case Temp.: -40 to +95°C Storage Temp.: -54 to +105°C Mechanical Shock: Per MIL-STD-202, Method 213, Cond. B Vibration: Per MIL-STD-202, Method 214, Cond. E Humidity: Per MIL-STD-202, Method 103, Cond. B Mechanical: SMA Connectors Weight: 2.6 oz. Volume: 0.90 cu in. Material: S303 Finish: Gold Plating per MIL-G-45204B
Dynamic Range	-68 to +5 dBm
TSS	-70 dBm max
Input VSWR	2.5:1 max.
Rise Time	9 nsec. typ., 12 nsec.max.
Fall Time	12 nsec. typ., 20 nsec.max.
Recovery Time	80 nsec. max.
Propagation Delay	15 nsec max
Log Accuracy	±1.5 dB max. (±2.0 dB w. temp)
Video Output Drift over temp and dynamic range	-0.04 dB/°C nom	TTL Control Mode (3) TTL0: DC Couple TTL1: Pseudo AC Couple CW Immunity Range: TSS to -30 dBm Pulse Response: 25 nsec. to 100 µsec. Droop: 1.0 dB max.(from -65 to -30 dBm)
Log Slope (into 100 ohm load)	50 ± 5 mV/dB (1)
Power Supply Operates ±12V to ±15V	+12V at 350 mA max -12V at 100 mA max
DC Offset	+100 ±75 mV (2)	RF Output Linear Gain: 40 dB typ. Limiting Output: +5 to +10 dBm Harmonics: -10 dBc max
Maximum Input Level	+20 dBm
Flatness (video)	±2.0 dB max. (or ±100 mV)
Baseline Noise	30mv RMS

This product offers the following options:
(1) Slope; 25 mV/dB to 75 mV/dB
(2) DC offset; -100 to +400 mV.
(3) Switchable DC coupled to PSEUDO AC coupled or internally set to one of the above.