Advanced Microwave,
Network Radar Receiver
Model: RRNS10

Features: Receives video signal through long cable 
 Remote monitoring capability via Ethernet 
 Digitized output to 8-bit 
 DC supply for RADAR receiver 
 Digital data output covering a wide dynamic range 
 Offers wide range of AC input for military and commercial 
Applications: Monitoring signal strength of detector log amp. using any computer 
 8-bit digital format output for further processing signal strength and data 
 Digital format output for data collection over a wide dynamic range of receivers 
 Test set for surveying airwave and calibration 

Outline Drawing

Specifications Rev. 6/2016
Video Input speed Up to 20 MHz Power supply input 90 to 250 V AC 50/60 Hz
Cable Length
(Must be terminated with the same impedance of the cable @VID in.)
Up to 250 ft. Regulated Output +12V 700 mA Max.
-12V 250 mA Max.
Audio Alarm Out
Goes on > 80% of signal
10W into 8 ohms
I/O ports RJ45 ethernet (USB 2.0 w/ adapter) Operating Room Temp. -20 to 70°C
I/O speed RJ45 10 Mbps Storage Temperatures -40 to 85°C
Optional USB 2.0 10 Mbps This unit optionally comes with 1U rack mount.
Data Out 60 Mbps App Note #114 for more detail.
Data/Level Out 8 bits, 30 Mbps All digital outputs are TTL compatible
Capture instantaneous pulse measurement down to 40 nano sec.
Hold time to 1%: 100 Micro sec. Min
Monitor screen shot consists of bar graph representing signal strength

Phone: 408.739.4214  -  Fax: 408.739.4148  -  Email: