AMI Catalog - Network Direction-Finding Receiver

Features:	•	Receives video signal through long cable
	•	Remote monitoring capability via Ethernet
	•	DC supply for RADAR receiver
	•	Digital data output covering a wide dynamic range
	•	Offers wide range of AC input for military and commercial

Applications:	•	Monitoring signal strength of detector log amp. using any computer
	•	Direction finding of airwave signals
	•	Digital format output for data collection over a wide dynamic range of receivers
	•	Test set for surveying airwave and calibration
	•	RADAR security surveillance

	Specifications	Rev. 6/2016

Video Input

Up to 6 ports

Power supply input

90 to 250 V AC 50/60 Hz

Video Input speed

Up to 20 MHz

Regulated Output

+12V

6 A Max.

-12V

800 mA Max.

Cable Length
(Must be terminated with the same impedance of the cable @VID in.)

Up to 250 ft.

Audio Alarm Out
Goes on > 80% of signal

10W into 8 ohms

I/O ports

RJ45 ethernet, (USB 2.0 w/ adapter)

Operating Room Temp.

-20 to 70°C

I/O speed

RJ45

10 Mbps

Storage Temperatures

-40 to 85°C

Optional USB 2.0

10 Mbps

This unit optionally comes with 1U rack mount.

Data Out

60 Mbps

App Note #114 for more detail.

All digital outputs are TTL compatible

Monitor screen shot consists of 6 bar graphs representing the signal strength of each video port.

Capture instantaneous pulse down to 40 nano sec.

Hold time to 1%: 100 Micro sec. Min