Advanced Microwave, Inc.
Microwave Tuner/Receiver
Model: CCNWS0218AR

• Power monitoring capability with fast response.
• User Friendly Network Controls
• Scanner covering wide frequency range
• Can be used with any Operating System
• Not connected to internet unless operator chooses
• Field test and calibration
• EW Communication & Simulation
• IF out with other baseband expansion

Outline Drawing

Specifications 2U Rack Mount
Frequency RF 2 to 18 GHz Networking Controls:
This part comes with hardware and software to be able to use it with
any operating system using USB 3.0 connection.
Freq. Increment: 10 KHz


REF: 300264-11
IF 1.5 ± 0.25 GHz
Bandwidth 500 MHz
Passband Ripple ± 0.2 dB / 10MHz
IF Band Flatness ± 2.0 dB max
Gain 40 dB min
LO Leakage -60 dBm max
Spurious Responses 60 dBc min (in band)
Output P1 dB +20 dBm min Dynamic Range ( VID out)
  • LED Indicators: 50 dB
  • Vid. Out 70 dB, 50 nsec. to cw
  • Vid. Rise time: 12 nsec max
  • Vid. Pulse Recovery: 90 n sec. max
IP3 +28 dBm typ
Noise Figure 5 dB max
Power Supply 100 to 240 VAC, 50/60 Hz
Phase Noise @1KHz 65 dBc/Hz
@10KHz 70 dBc/Hz
Stability .05 PPM
Lock Indicator LED Off, Locked Operating Room Temperature -20 to 50°C
Storage Room Temperature -40 to +85°c
LED On, Unlocked
Front panel provides signal strength LEDs, 5 dB/step and high speed output detecting any incoming signal of -65 to +5 dBm and pulse processing down to 50nsec, pulse width and front panel switch control CW to Pseudo AC couple.

Phone: 408.739.4214  -  Fax: 408.739.4148  -  Email: